Add-on · for the ZFL LiDAR plate
15 mm Rod
Spacer
Raises the ZFL LiDAR plate 19.05 mm above a 15 mm LWS rod bracket so it clears the rods, and holds it in a pocket so it can't rotate. Carbon-fiber reinforced PET, two 1/4-20 screws included.
- Fits
- ZFL LiDAR plate · 82 × 52 × 3 mm
- Mounts to
- 15 mm LWS bracket · 1/4-20 on 36 mm
- Material
- Carbon-fiber reinforced PET
- Size
- 25.8 × 55.6 × 21.45 mm
- Rise
- 19.05 mm under the plate
- Stack
- 22.05 mm bracket face to LiDAR
- Rod clearance
- ≈ 3 mm above 15 mm rods
- Screw holes
- 2 × 1/4-20 clearance · 36 mm centers
- Weight
- ≈ 23 g
- Service temp.
- ≈ 90 °C
- Included
- 2 × 1/4-20 screws · 1 1/8"
Your order
$19USD
Plus shipping
$5 US · $20 international
Heads up
-
01
Pocket
The plate sits in a 2.4 mm deep pocket walled on three sides. The walls keep it from rotating; the screws only clamp.
-
02
Rod clearance
The pocket floor is 19.05 mm above the bracket face, which gives about 3 mm of clearance above 15 mm rods.
-
03
Screws
Two 1/4-20 × 1 1/8" button-head screws go through the plate and the spacer into the bracket's holes on 36 mm centers. The LiDAR attaches to the plate with its own M3 screws.
Photos · on the bracket and on the rig
What you need
Fits the ZFL plate and 15 mm LWS rod brackets.
The spacer works with the ZFL LiDAR mounting plate and any 15 mm rod bracket with 1/4-20 holes on 36 mm centers. We test on the SmallRig 942. Two 1/4-20 × 1 1/8" screws come with the spacer, and the LiDAR attaches to the plate with its own M3 screws. The plate is sold separately or as a kit with the spacer.
